* VLAN Trunking (ASA 5510, ASAOS 7.2.1)
Hey! If you are trying to trunk VLAN 1, you are going to run into trouble (using the below config, I think you may have to configure Ethernet0/3 (NOT a sub-interface) to have an ip address. You will not be able to type in \’vlan 1\’, as it is assumed). You have been warned.
same-security-traffic permit inter-interface same-security-traffic permit intra-interface interface Ethernet0/3 no nameif no security-level no ip address ! interface Ethernet0/3.1 description Development Network vlan 50 nameif dev security-level 40 ip address 192.168.50.1 255.255.255.0 standby 192.168.50.2 ! interface Ethernet0/3.2 description Test Network vlan 88 nameif test security-level 60 ip address 192.168.88.1 255.255.255.0 standby 192.168.88.2